- 4 stroke engine, Commercial model – 40HP. Manual starter, Hydro Trim, Tiller handle, Long Shaft (L: 21.1 inch)
- Top Reliability in Marine Engines.
- Exceptional product life, unmatched reliability and durability.
F40JMHD
4 Stroke - Commercial F40JMHD
Compare
1
OVERVIEW
BLOW-BY GAS REBURNING SYSTEM
- Removes any oil in the blow-by gases and returns only the fuel to the combustion chamber through the intake system, keeping the exhaust gases clean.
HARD-CHROME-PLATED WATER PUMP
- Plating the inside of the water pump with hard-chrome helps to prevent wear in muddy water and maintain high performance.
PERFORMANCE
| Max. prop shaft output (kW / HP) | 29.4 / 40 |
| Full throttle operating range (r/min) | 5000 - 6000 |
| Dry weight (Kg) | L: 95 |
ENGINE
| Engine Type | 4 stroke, SOHC, In-line 3 |
| Displacement (cm3) | 747 |
| Bore x Stroke (mm) | 65.0 x 75.0 |
| Compression Ratio | 9.4 : 1 |
| Fuel induction system | 3 Carburetors |
| Gasoline | Regular |
| Lubrication system | Wet sump |
| Engine oil capacity (L) | 1.7 / 1.5 ( with/ without oil filter replacement) |
| Ignition system | CDI |
| Alternator | 14A |
| Cooling system | Raw-water, Thermostatically controlled |
| Exhaust system | Through propeller boss |
BRACKET / DRIVE
| Starter system | Manual starter |
| Tilt system | Hydro Tilt 5 positions |
| Controls | Tiller handle |
| Steering angle | 40 deg. each direction |
| Gear shift | F-N-R |
| Gear ratio | 2.0 (26/13) |
| Propeller rotation | Clockwise |
| Engine transom height (mm / inch) | L: 536 / 21.1 |