- 2 stroke Enduro mode – 40HP. Manual starter, Manual Trim, Tiller handle, Short shaft (S: 16.7 inch) and long shaft (L: 21.7 inch)
- Specialized Durability and Reliability.
E40XMH
2 Stroke Enduro E40XMH
Compare
1
OVERVIEW
MANUAL (RECOIL) STARTER
- The engine can be easily started by lightly pulling the starter knob in front of the top cowling
LONG-LIFE PISTON RING
- The piston ring has minimal friction resistance and good heat conductivity
LARGE CAPACITY WATER PUMP
- The large, high-efficiency water pump prevents engine overheating by ensuring more than enough cooling water in any condition
EXTREMELY DURABLE CRANKSHAFT
- The crankshaft is made of a specially hardened material for longer engine life, and the engine is well balanced for lower vibration.
SHALLOW WATER DRIVE
- The outboard can be set at a tilt angle, preventing it from hitting the bottom when operating in shallow water.
HARD- CHROME-PLATED WATER PUMP
- Plating the inside of the water pump with hard-chrome helps to prevent wear in muddy water and maintain high performance.
PERFORMANCE
| Max. prop shaft output (kW/HP) | 29.4 / 40 |
| Full throttle operating range (r/min) | 4500-5500 |
| Dry weight (kg) | S: 72, L: 74 |
ENGINE
| Engine Type | 2 stroke - Enduro, In-line 2 |
| Displacement (CM3) | 703 |
| Bore x Stroke (MM) | 80.0 x 70.0 |
| Compression Ratio | 6.0 : 1 |
| Fuel induction system | 1 Carburetor |
| Gasoline | Regular |
| Lubrication system / Mixing ratio | Pre-mixed fuel and oil / 50 : 1 |
| Ignition system | CDI |
| Alternator | 80W (optional) |
| Cooling system | Raw-water, Thermostatically controlled |
| Exhaust system | Through propeller boss |
BRACKET / DRIVE
| Starter system | Manual starter |
| Trim system | Manual Trim 7 positions |
| Controls | Tiller handle |
| Steering angle | 45 deg. each direction |
| Gear shift | F-N-R |
| Gear ratio | 2.0 (26/13) |
| Propeller rotation | Clockwise |
| Engine transom height (MM/INCH) | S: 424 / 16.7, L: 550 / 21.7 |